A vector network analyzer (VNA) measurement is only as good as its calibration. At CreativeIT Group our engineers perform the user calibration of your VNA, its verification and the calibrated measurements you need, using the Agilent 85062B electronic calibration (ECal) kit. We come to your plant, or you send your components to our Monterrey lab; you receive a report with photo and video evidence and NIST-traceable results.
What the service covers
The 85062B is a 2-port ECal with 3.5 mm connectors covering 1 GHz to 26 GHz. It performs a complete two-port calibration with a single connection and replaces the traditional technique based on mechanical standards, which reduces handling errors and improves repeatability. With it we offer:
- Complete two-port VNA calibration at the reference plane of your cables or fixtures.
- Calibration verification before critical measurements or after the test setup is moved.
- Calibrated S-parameter measurements of antennas, cables, filters, passive components and amplifiers.
- Non-insertable calibrations, taking advantage of the kit’s slotless precision connectors.
If you only need the kit, see the Agilent 85062B electronic calibration kit rental. For the full characterization scope, see our VNA measurements of antennas, cables, passives and amplifiers.
Typical applications
- Cable and coaxial assembly manufacturers validating loss and match.
- RF and microwave design teams characterizing antennas, filters and amplifiers.
- Production lines that need repeatable measurements across shifts.
- In-house labs that need occasional support with their VNA.
How we do it
- We review your VNA, frequency range and devices to be measured, and send a quote the same day.
- We define the reference plane, adapters and parameters to measure.
- We calibrate with the 85062B ECal and verify the result before measuring.
- We measure your devices and document the setup with photos and video.
- We deliver the report with the data and review it with your team.
What the report contains
- Equipment used, VNA configuration and calibration method.
- Calibration verification results.
- S-parameter plots and data for each device measured.
- Photo and video evidence of the test setup.
- Available in Spanish and English.
Why CreativeIT
- Our own field and lab engineers; we do not subcontract.
- Same-day reply and quote.
- Lab in Monterrey and coverage across Mexico.
- NIST-traceable results and bilingual reports.
Frequently asked questions
Does this service replace the annual metrology calibration of my VNA?
No. It is the user calibration that corrects systematic errors before measuring. Metrology calibration of the instrument is a separate service.
What range and connectors does the 85062B cover?
1 GHz to 26 GHz, with 3.5 mm connectors on both ports.
Can you measure my components if I don’t have a VNA?
Yes. You can send your devices to our Monterrey lab and we will perform the calibrated measurements for you.
Request your service
Tell us about your VNA and what you need to measure, and we will reply the same day. Contact CreativeIT Group to schedule the calibration or measurements.
