Total Control of Moisture and Contaminants in Your Air Line
Is your compressed air system really delivering clean, dry air at stable pressure, or is it affecting the performance and service life of your equipment without you noticing?
If you notice moisture in the lines, pressure drops, repeated valve failures or frequent maintenance on pneumatic tools, your air system is not being properly treated.
The solution is to implement a 3-stage filtration system that:
-
Removes solid particles that wear down internal components
-
Separates oil and aerosols that contaminate sensitive equipment
-
Reduces moisture to prevent corrosion and internal damage
-
Maintains stable pressure for uniform performance
The 3/8″ NPT Mid Flow compressed air filter with 3-stage system is an advanced air preparation unit designed to provide clean, dry and stable air in pneumatic and instrumentation applications. It combines a pressure regulator, a high-efficiency coalescing filter and a desiccant dryer.
What Is Included?
-
Integrated Pressure Regulator
Adjusts and maintains the outlet pressure within the desired range, ensuring stability for tools, sensors and sensitive pneumatic equipment. -
Mid-Flow Coalescing Filter
Efficiently removes water droplets, oil, solid particles and aerosols from compressed air, protecting valves, actuators and measurement equipment. -
Desiccant Dryer
Reduces moisture content to very low levels using high-capacity desiccant material, ensuring “dry” air or air with a low dew point.
Key Advantages
- Reduces contaminants (water, oil, particles) that can damage pneumatic components or affect precise measurements.
- The integrated regulator ensures your instruments and tools operate at constant, reliable pressure.
- By removing contaminants and moisture, it extends the service life of valves, pneumatic equipment and measurement sensors.
- Its modular design and standard 3/8″ NPT connections allow quick installation on existing air lines.
- Maximum inlet pressure of 150 PSI. This unit will regulate the inlet and outlet pressure of your compressed air, removing moisture, water vapor and oil from your compressed air lines, and finally drying the super-clean air with an in-line desiccant air dryer.
- Air flow capacity: 88 cubic feet per minute
Typical Applications
-
Air preparation for pneumatic tools
-
Filtered air supply to measurement instrumentation
-
Clean air for humidity/dew point sensors
-
Pneumatic systems on production and manufacturing lines
-
Applications where dry, stable air is required
System stages:
STAGE 1: Water trap filter – Pressure regulator. Equipped with a 5-micron element to remove 95% of the moisture and initial debris from your compressed air line. The regulator adjusts pressure from 7 to 150 PSI. 5-ounce polypropylene bowl with sight glass.
STAGE 2: Coalescing filter, also known as an oil removal filter, equipped with a 0.01-micron element that removes 99.98% of the moisture, water vapor and oil that passed through your stage 1 filter. 5-ounce polypropylene bowl with sight glass. A red indicator pops up when it is time to change the filter.
STAGE 3: Desiccant air dryer, dries your super-clean air before it reaches your pneumatic tools. Uses 5 ounces of desiccant beads in the bowl. The beads change from blue to pink when it is time to replace them. The unit includes 2 bags of desiccant beads.
Invest in Quality Air
80% of failures in pneumatic systems are related to contamination by moisture, oil or solid particles. A 3-stage filtration system doesn’t just clean the air: it stabilizes the entire operating process.
When air is not treated properly, the result is:
-
Prematurely deteriorated seals
-
Blockages in valves and micro-orifices
-
Accelerated wear on actuators
-
Pressure variations that affect accuracy
The result is lower productivity and higher hidden costs.
A compressed air system without proper filtration directly impacts productivity. Adding a coalescing filter regulator with a desiccant dryer is a strategic decision to improve operational reliability and protect your investment in industrial equipment.
Installation and Maintenance
The system features:
-
Standard 3/8″ NPT connections
-
Modular design for easy mounting
-
Accessible replacement filter elements and desiccant
-
Simple, quick maintenance
Need Advice or a Quote?
Contact us today on WhatsApp at 8117860768 for pricing, availability and usage recommendations. At Creativeit Group, our specialized technical team can help you integrate it into your measurement processes.
