Do you need to take oscilloscope measurements or do you need a function generator? We have this measuring instrument, which combines both functions, available for your measurements or tests during maintenance or repairs. At Creativeit Group we have a wide variety of measurement equipment for rental and sale.
The DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope launched by FNIRSI, combining an oscilloscope and a signal generator in one.
The oscilloscope has a real-time sampling rate of 500MSPS and an analog bandwidth of 180MHz.
For display, it uses a 2.8-inch full-view IPS LCD with high contrast and digital phosphor technology. The waveform display is good, and the waveform color modes are grayscale and color temperature.
With a waveform update rate of up to 50,000 wfm/s, it is easier to display low-probability abnormal signals. The time base system includes a ZOOM time base to make it easier to analyze digital protocol signals.
With a vertical sensitivity as low as 5mV, it can better measure small 5mVPP signals. It offers an ultra-high signal-to-noise ratio, fully sealed shielding measures and a stable circuit feedback design for a clean, clear waveform.
The original adjustable automatic bandwidth limit and adaptive adjustable trigger holdoff are suitable for analyzing and measuring signals with relatively high noise. The 20M hardware bandwidth limit can filter out noise above 20MHz.
The DDS signal generator has 14 types of function waveforms and a custom arbitrary waveform.
The sine wave frequency can reach up to 20MHz, and the other waveforms can reach up to 10 MHz
Specifications
Number of channels: 2
Analog bandwidth: 180MHZ
Maximum sampling rate: 500MSPS
Input coupling: DC/AC
Rise time: 2.5 nS
Memory depth: 120Kpts
Input impedance: 1MΩ-18PF
Vertical sensitivity: 5mV ~ 10V(1X)
Time base range: 5nS ~ 50S
DC accuracy: ± 2%
Time accuracy: ± 0.01%
Measurement range: 40mV ~ 80V(1X)
Digital phosphor technology: supported
Color temperature display: supported
Zoom time base: supported
20M hardware bandwidth limit: supported
Adjustable automatic bandwidth limit: supported
X-Y mode: supported
FFT: supported
Cursor measurement: frequency/period/amplitude
Trigger detection: digital trigger
Trigger mode: Auto/single/NORMAL
Trigger edge: rising/falling
